- Does your system have a top and bottom mechanical seal pressure of 2000N (2KN)
- Does the top and bottom seals incorporate a tongue and groove detail
- Does your system have magnetic edge profiles
- Does your system have a jacking mechanism with a seal pressure of 2 KN
- Does your system have a cam mechanism, if so what seal pressure can it achieve
- Can your system be adapted to accommodate up to 50mm of structural deflection whilst maintaining the maximum seal pressure
- Is your top track powder coated white and does it incorporate a ceiling support trim as standard
- Are your top and bottom seals powder coated black to offer a shadow gap detail as standard
- If accidentally damaged can your face boards be replaced on site or would you need to replace the whole panel
- Are all of your systems 100mm thick or do they increase when the acoustic rating rises
- Does your system employ a self-adjustment locking mechanism for the roller units guaranteeing the panels will never drop out of level
- Is your system (including top & bottom seals) acoustically tested to ISO 140-3, and can you produce a certificate to verify this
- Does your system have an internal or external telescopic sleeve and does it exert 2KN of pressure
- Does your system have mechanical seals in the telescopic sleeve or fixed sweep seals
- Does your system have a fully welded steel frame
- If a pass door is required, is your door panel acoustically tested to ISO 140-3, with a certificate
- Can you offer a full service agreement with an extended warranty
- Is your system manufactured in the UK
- Has your system been tested for a thermal rating
- Has your system been tested for endurance to DIN 310.000/3.79 over 3500 operations with certification to verify this
|
 Click image to download as PDF |
